How I Get Tons of Amazon Reviews Without Breaking Amazon’s Terms of Service



To receive the top 10000 Reviewers List and the 7 Day Letter bonus, go to these links and I will email it to you: https://justonedime.com/7-day-letter and https://justonedime.com/10000-reviewers-l…

source

RV Secrets – What they do not tell you

Product Name: RV Secrets – What they do not tell you

Click here to get RV Secrets – What they do not tell you at discounted price while it’s still available…

All orders are protected by SSL encryption – the highest industry standard for online security from trusted vendors.

RV Secrets – What they do not tell you is backed with a 60 Day No Questions Asked Money Back Guarantee. If within the first 60 days of receipt you are not satisfied with Wake Up Lean™, you can request a refund by sending an email to the address given inside the product and we will immediately refund your entire purchase price, with no questions asked.

Continue reading RV Secrets – What they do not tell you

ImPRESSive Putty Re-Usable Mold Making Product Review



If you work with polymer clay, then you probably have a drawer full of all kinds of silicone molds that have only been used a few times, and that you may never use again. They take up a ton of space that could be used for storing other tools and supplies instead.r
r
There are pre-made molds, as well as ones you can make yourself using 2 part silicone molding putty.r
r
What is very cool about the ImPRESSive Mold Putty that I am reveiwing today, is that you can re-use the putty over and over to make new molds, any time you want.r
r
So now you never have to worry about messing up when you are making your own DIY molds. And if you find that you are no longer using a particular mold design, simply heat it up in the microwave and make a new one!r
r
To purchase Impressive Putty here is our affiliate link that will take you direct to the product page. r
r
And for more info and related links about molds and molding materials suitable for use with polymer clay, pease visit our PcT blog (Video #766). r
r
Polymer Clay Tutor, Cindy Lietz & Doug Lietzr
Love What You make. Make what You make.

View at DailyMotion

Product Review – Singer Futura XL400 Embroidery Sewing Machine

I’ve had this machine for a few months now, have embroidered several designs from simple words to detailed designs of over 60,000 stitches, endured a few frustrations over it, but overall I love this machine. My first embroidery machine was the Singer Futura CE250, so I traded up for the Singer Futura XL400. It has it’s pros and cons, which I’m going to thoroughly address here. I’m also going to give a few helpful hints, tips, and tricks on operating the machine.

Pros:

Swift Smart Threading System makes it a breeze to thread. Instead of going up and down through the threading system, you simply go down.

I love the Drop and Sew Bobbin feature, too. Instead of pulling the bobbin thread up with the needle, you simply put it through the space provided and it cuts it off for you. No need to pull it up with the needle.

I like the snap on hoops, rather than the ones you have to screw in, like for the CE250.

Hint: If your machine shows a message that the hoop is not the correct size for the design when it clearly is small enough to fit in the hoop, then you may need to make sure it is in all the way. If you have not started a design yet, turn the power of the machine off, take off the hoop, turn on the power, then put the hoop on. This should fix it.

I like the multi-hoop capability, but wish it was easier to line up. This and the larger hoop were the reasons I sold my CE250 and bought this one instead. The large hoop has an area of about 6.5 by 10.5 inches. It has multi-hooping capability, which I have not tried yet, but can have four large hoops in a square. The Features page says 18.5 by 11 inches. The small hoop has an embroidery area of about 4 by 4 inches. In regards of how many stitches a design has, the largest embroidery design that I used on this machine had over 60,000 stitches with no problem.

Hint: Use the print feature to help align the design where you want it. If you are embroidering something that needs to be centered but it’s on a small piece of fabric, you can use a large piece of fabric, embroider it, then cut out the fabric to the size you need. Or you can use spray on adhesive to keep the small piece of fabric in place on the stabilizer. If you are using embroidery for a quilt (stippling), use disappearing ink to measure where the hoop needs to be.

The automatic needle threader is a good idea, but I like the one on the CE250 better because it seemed to work a lot better. My favorite is the one on the Quantum 9960, which I review in another post. The one on the XL400 is very picky. I’m lucky to get it on the third try. You have to practically put the thread into the little catcher thing, straining your eyes doing it which defeats the purpose of an automatic threader. Also, make sure your needle is in correctly. The CE250 wouldn’t even let you put it in wrong. So when I first got the XL400, I put the needle in which ever way it allowed me to, which happened to be the wrong way. So the automatic threader wouldn’t work at all. Some pressure feet wouldn’t work, either. I finally had a light bulb come on and realized that I might have the needle in wrong. Remember: Flat Back-the flat side of the needle faces towards the back.

Hint: Hold the thread with your left hand as you push down the threader and hold the other end of the thread with your right hand.

Strange as it is, my favorite feature on the XL400 is the speed control. When embroidering a design, you can set the speed from very slow to very fast. I normally set it about 1/3 between slow and fast. If it is too fast, the design does not come out as well-there’s a lot of bobbin thread that comes up.

Cons:

Editing and autopunch software isn’t included with the basic software as it did with the CE250. You have to purchase it separate and it’s quite expensive. It isn’t compatible with the CE250 software, so if you already have all the software from CE250, it still won’t work with it. You have to repurchase it. I use a free program for my editing, Stitch Era Universal.

It is very clanky and loud when the hoop moves on high speeds. I wish it was quieter for when I am embroidering late at night when everyone else is sleeping. Of course if I’m embroidering during the day, it’s no problem.

Message System is not very reliable. It beeps at me constantly when there is no thread break. I have a thread net and spool cap for my thread, which used to fix the problem with my CE250, but it doesn’t seem to make much difference with the XL400. When it is not even close to running out of bobbin thread, it will beep, but when I completely run out of bobbin thread or the top thread breaks, it doesn’t beep until after at least 8 stitches have past after the break, but the good news is that you CAN go back by pushing the back button on the machine. Push it until you get to where you want it to start sewing again, then press the start button.

Hint: Sometimes all you need to do is tighten or loosen the thread and it will stop beeping. Hold the thread with your fingertips very loosely until it stitches for a while without beeping, then you can let go. Also, check to see if the thread is tangled around the thread holder.

Thread holder is not firm. The thread cannot stand upright. If it does, it gets pulled and wound up around the holder.

Hint: Place the large spool pin cap upside down toward the top of the thread holder, place the thread on it, making sure it fits all the way on the holder, then place another smaller spool pin cap on the other side of the thread.

Would Improve if it Had:

A feature that would really improve this, other than the above mentioned, would be an automatic thread cutter, as the Quantum Stylist 9960 has. Otherwise, you are wasting a lot of thread because you have to pull the entire hoop off before you can cut it. So if you are taking it off just to check the bobbin, you have to either rewind the bobbin to save that thread that you have just pulled up, or you waste it.

Overall, the machine is pretty nice. Other than the above problems mentioned, this would be the perfect embroidery machine, within this price range. I have not even used it as a regular sewing machine because I have my Quantum 9960 for that. When I had the CE250, it was the only machine I had. I didn’t like going back and forth with taking apart the embroidery part of the machine and setting it up, then taking it apart again to use it as a regular sewing machine. I wish Singer had an embroidery machine that only did embroidery, cut out the special features for a sewing machine, therefore cutting the price and the extra pieces that it comes with.



Source by Diana C Neill

REVIEW: Xume Adapters – My New Favorite Thing



Ethics Statement: I did not pay for this review unit. I am not being paid for this review.

There are many great tools out there, but every now and then you come across one that changes how you shoot. Well, today I am sharing a review of one of those tools. Xume Adapters have changed the way I use filtration on my projects. What use to be a hassle when working with filters and multiple lenses, is now an effortless task.

Product Website: http://xumeadapters.com/

Likes: 79

Viewed: 10794

source

Super Productivity Secrets: For Entrepreneurs Ready And Willing To Operate At FULL Capacity

Product Name: Super Productivity Secrets: For Entrepreneurs Ready And Willing To Operate At FULL Capacity

Click here to get Super Productivity Secrets: For Entrepreneurs Ready And Willing To Operate At FULL Capacity at discounted price while it’s still available…

All orders are protected by SSL encryption – the highest industry standard for online security from trusted vendors.

Super Productivity Secrets: For Entrepreneurs Ready And Willing To Operate At FULL Capacity is backed with a 60 Day No Questions Asked Money Back Guarantee. If within the first 60 days of receipt you are not satisfied with Wake Up Lean™, you can request a refund by sending an email to the address given inside the product and we will immediately refund your entire purchase price, with no questions asked.

Continue reading Super Productivity Secrets: For Entrepreneurs Ready And Willing To Operate At FULL Capacity

Ford CEO Hackett To Reviewing Future Products, Plants, Countries



Ford Motor Company Chief Executive Jim Hackett is reviewing the automaker’s operations in India and other markets. He also looking at Ford’s future product programs, including plans to build a self-driving commercial vehicle in 2021. Hackett took over as CEO in May. He told investors he is working on a 100-day review of Ford’s operations, but has so far provided few details of the process.

View at DailyMotion

4 Ideas to Write About in Your Blogs

One of the toughest challenge in blogging is to find the topic to blog about. Sometimes blog owners are not updating their blog for months just because they can not find idea to write about in their blog. If you are facing the same problem, these are the 4 ideas to write about in your blog.

1. Quick blog list

People like to read blog since since it's convenient to read them. It helps to save time since they do not have to search all over the internet. Help your visitor by making a blog list that can save their time searching for the right solution to their problems. Help your visitor to help you.

The blog owner on your list may also return the favor by visiting your blog when they see their blog are receiving visitor from your blog. Who knows he or her her might become your new potential friend that share the same hobby.

2. Product review

Ever face bad experience using a product? If yes, why do not you write about it. Write a blog post dedicated about the bad experience and help other people so that they will never experience it. Tell your reader why are you facing that experience and how you solve it. Perhaps you have found better product for particular problem.

Do not be biased when writing a product review. Never accuse something base on a weak reasoning. If you never face bad experience, write an honest review about your great experience using a product that really help to solve your problem.

3. Blog review

Blog review is not a bad idea to write about. Write the reasons you like a blog and why you recommended blog reader to visit it. Be it a blog dedicated for an anime that you like or a hobby that you like. Review the blog and tell you reader about it.

When writing a review it is a good idea to write about how the blog owner can improve their blog. The blog owner are more than happy to hear suggestions from their loyal reader on how he or her can improve their blog.

4. Book review

Reading is a good hobby. It helps to widen your field of knowledge and make you a much more clever person. After finished reading a book write about it in your blog. Perhaps you can write a synopsis of the book or write about a topic that you like in the book.

Write your opinion on the book you read. Is it worth of your time? If not then tell the reason why. It may help to save your reader pocket money and they can spend the money to but another book. See! Now you have one more happy reader.



Source by Fahmi Raazali

Solo Tribe 2010 Product Review



Solo Tribe 2010 Product Review by Tom Hyser. Filmed by Kevin Dowling at the WRS finals in our hotel room. A quick little review about the radical new Solo Tribe 2010 skate. All new 72mm CR + grip wheels, larger buckle protectors, crazy stylish black and neon green colors.

Likes: 7

Viewed: 5897

source